How to Fix a Blender That Smells Like It’s Burning: Troubleshooting Tips

**Disclosure: We recommend the best products we think would help our audience and all opinions expressed here are our own. This post contains affiliate links that at no additional cost to you, and we may earn a small commission. Read our full privacy policy here.

Blenders are essential appliances in any kitchen, but they can sometimes develop a burning smell during operation. This smell can be an indication that something is wrong with your blender and ignoring it could result in damage to the appliance or even pose a safety risk. In this article, we will provide you with troubleshooting tips to fix a blender that smells like it’s burning.

Troubleshooting Your Blender’s Burning Smell

When you notice a burning smell coming from your blender, the first action to take is to switch it off immediately. Continuing to operate your blender with the burning smell can cause irreparable damage to the motor or other parts of the appliance.

Understanding the Causes of a Burning Smell in Your Blender

The burning smell in your blender is typically caused by some underlying issues. One of the primary causes is overuse of your blender beyond its recommended capacity. This can lead to overheating, which can cause the burning smell. Additionally, running your blender for an extended period can cause the motor to overheat, which can also cause the burning smell.

The Dangers of Ignoring a Burning Smell in Your Blender

Ignoring the burning smell in your blender can have serious implications. If the issue is not addressed, it can result in more serious faults, including damage to the motor or even electrical wiring. This can be a severe safety hazard and may even cause a fire in your kitchen. Therefore, it’s always best to take immediate action when you notice a burning smell coming from your blender.

How to Troubleshoot a Burning Smell in Your Blender

If you notice a burning smell coming from your blender, the first step is to turn it off and unplug it from the power source. Allow the blender to cool down for at least 30 minutes before attempting to troubleshoot the issue. Check the blades and the jar for any signs of damage or wear and tear. If you notice any cracks or chips, it’s best to replace the parts before using the blender again.

Another way to troubleshoot the issue is to check the power cord and the plug for any signs of damage. If you notice any frayed wires or loose connections, it’s best to replace the cord or the plug before using the blender again.

Avoiding Common Mistakes That Cause a Burning Smell in Your Blender

To prevent a burning smell in your blender, it’s essential to avoid some common mistakes that we often make. One of the most common mistakes is overfilling your blender, which can cause the motor to overwork and lead to overheating. Similarly, running your blender for an extended period can also cause overheating and the burning smell. Therefore it’s always necessary to follow the recommended guidelines when using your blender.

Tips for Properly Using Your Blender

To use your blender correctly and avoid a burning smell, ensure that you follow the operating instructions provided. You should also avoid overfilling your blender and limit the running time to the recommended guidelines. Another tip is to cut the ingredients into small pieces to reduce the workload on your blender and avoid overheating.

How to Choose the Right Blender for Your Needs

Choosing the right blender is essential to avoid a burning smell. There are different types of blenders in the market, each with its unique capabilities. It’s essential to choose a blender that matches your specific needs to avoid overworking it. Some essential factors to consider when choosing a blender include the motor’s strength, the blending speed options, the capacity, and the overall design and construction.

Maintaining Your Blender for Optimal Performance

To avoid a burning smell in your blender and ensure optimal performance, proper maintenance is critical. One of the essential maintenance tips is to clean your blender thoroughly after each use to prevent the buildup of residue that can clog the blades and cause overheating. Additionally, ensure that you regularly lubricate the blades to keep them running smoothly. Additionally, always keep an eye on the blender’s cords and wires and repair or replace worn-out parts promptly.

Cleaning and Caring for Your Blender

Cleaning your blender regularly is an essential maintenance tip to avoid a burning smell. To clean your blender thoroughly, first, disassemble the appliance and wash each part separately. You can use warm soapy water and a soft-bristled brush to clean the parts. Ensure that you rinse each part thoroughly and allow them to dry before reassembling the blender.

Replacing Worn Out Parts to Prevent a Burning Smell

If you notice that your blender is not functioning correctly or has a burning smell, it may be time to replace some of its parts. Worn-out blades, for instance, can cause overheating, leading to the burning smell. Therefore, always inspect the blades and the other parts of your blender regularly and replace faulty parts promptly. This will help prevent a burning smell and extend the appliance’s lifespan.

Proper Storage of Your Blender

Proper storage of your blender is also essential to maintain its optimal performance. Always store your blender in a dry and cool place to prevent moisture buildup that can damage the motor and other parts. Additionally, ensure that you store the blender with its lid on to prevent dust and debris from entering the appliance. If you plan to store the blender for an extended period, ensure that you clean it thoroughly and remove any food residue to prevent mold and bacteria growth.

Alternative Solutions for a Smelly Blender

Suppose you’ve tried the above troubleshooting tips and your blender still produces a burning smell. In that case, there are alternative solutions you can consider. One of the solutions is to repurpose your blender for other kitchen tasks. You can use it to grind other ingredients, such as coffee beans or nuts, or even make purees and soups. Additionally, you may also seek professional repair services or consider replacing the blender altogether.

How to Repurpose Your Blender for Other Kitchen Tasks

If your blender is beyond repair, you can still make the most use of it by repurposing it for other kitchen tasks. Some of the creative ways to repurpose your old blender include using it as a spice or coffee grinder, as a mixer or whisk, or as a homemade butter maker. Repurposing your blender is a great way to give it a new lease of life and also save on costs.

Recommended Reading for Blender Maintenance and Troubleshooting

Finally, to keep your blender in excellent condition and avoid a burning smell, make it a habit to read the manufacturer’s user manual and follow the recommended guidelines when using and maintaining it. Additionally, there are numerous online resources and guides on blender maintenance and troubleshooting that you can read through to learn more.

Professional Repair Services for Your Blender

If you’re not comfortable with repurposing your blender or replacing it altogether, you can also seek professional repair services. Many appliance repair companies specialize in blender repairs and can diagnose and fix the issue causing the burning smell. While this option may be more expensive than repurposing or replacing your blender, it can be a worthwhile investment if you have a high-quality blender that you want to keep using for years to come.

Preventing a Smelly Blender in the Future

Finally, to prevent a smelly blender in the future, there are a few things you can do. First, make sure to clean your blender thoroughly after each use, especially if you’ve blended strong-smelling ingredients like garlic or onions. You can also add a drop of dish soap and some warm water to your blender and blend it for a few seconds to help remove any lingering smells. Additionally, avoid overfilling your blender and using it for extended periods, as this can cause the motor to overheat and produce a burning smell.


Burning smell in your blender is a warning sign that something is wrong with your appliance. In this article, we’ve provided you with troubleshooting tips to help you fix your blender and avoid a burning smell. By following these tips, you can also prevent other faults from developing and extend the lifespan of your blender. Always take the necessary steps when you notice a burning smell in your blender to avoid serious hazards.

It’s important to note that if your blender continues to emit a burning smell even after troubleshooting, it may be time to replace it. Continuing to use a faulty appliance can be dangerous and may result in further damage or even injury. When shopping for a new blender, be sure to read reviews and choose a model that is known for its durability and safety features. Remember, investing in a high-quality blender can save you money in the long run by avoiding costly repairs and replacements.

Leave a Comment